Instructions for flat and warp knitting

Posted by KKT

1. Wrong program using

2. Different jacquard on back side

* Mirror – nice but too heavy

* 1 needles fluting – weight bit less.

* 3 needles fluting – we knit this jacquard when we use lining. Because- -its heavy is less

* Tuck stitch patterns get more shrinkage .some time to get nice effect. We- -have to stretch and steam

* Rib structure – width wise have to pull if it’s a scarf

If it’s a glove rib part should not steam

* C. M. S production is festive there is a damage will get more. Have to-

-keep more attention

* When we feed two yarns – one yarn is break, tension will get loose

* Tension line

* Needle damage

* Roller marks

* Fabric don’t take down equally

1. Slower than C.M.S

2. It’s run with card systems

3. when the hole get drop no of rows can get difference

1. We need more cram according to needle

2. Color shading will appear needle wise difficult to rewind

3. Some fabric at steaming width wise has to stretch

4. Some fabric has to stretch length wise

KKT Madhusanka